Notes on gas masks
Leave a message
(1) If a hole is found on the face mask or airway of the gas mask, you can pinch the hole with your finger, and if the air pipe on your gas mask is damaged, you can use the canister Just connect it directly with the hood. If any of the above conditions occur, you must evacuate the work area in time and go to a safe area to replace the anti-virus equipment in time;
(2) If the exhalation valve on the gas mask is broken, you should use your fingers to block the hole of the exhalation valve, release your hand when you exhale, and block it with your hand when inhaling. The above methods will seriously threaten your health and life safety. It is recommended to leave the operation area in time and replace the equipment in a safe area;
(3) If the hood on the gas mask is damaged badly, you can consider putting the canister directly in your mouth, then pinching your nose, and use the canister to breathe. At the same time, you must evacuate the scene at the first time;
(4) If there is a small hole in the canister on the gas mask, you can use your hand or other materials to block it. And evacuate in time;
(5) If the gas mask is damaged, aging, leaking, or the exhalation valve is broken, then it can no longer be used. When using a gas mask, if you feel difficult to breathe, feel very uncomfortable, and can smell the poison, you should retreat immediately. You cannot remove the mask of the gas mask in the poison zone . Strictly speaking, when the breathing resistance becomes greater, or smells when you wear it properly, there is one of these situations and you need to evacuate the work area in time and replace the equipment.






